space
dot Return to list
dot Boat Insurance
dot Boat Transport
dot Boat Loans
dot Boat Surveys
dot Trade-in Values


Bookmark This Ad
 

2020 Seawind 1260 - 41'


 
Year 2020
Length 41ft.
Price call for price
Type: New
Categories:
Location Chicago,
Hull Material Composite
Engine type Other
Fuel Other
Contact Information
 
Dimensions
Beam: 22 ft 3 in
Max Draft: 3 ft 8 in
Dry Weight: 18400 lbs
Engines
Fuel: Other

Additional Specs, Equipment and Information:

Dimensions
LOA: 41 ft 0 in
Beam: 22 ft 3 in
Maximum Draft: 3 ft 8 in
Dry Weight: 18400 lbs
Accommodations
Number of heads: 2

For the serious sailor...

The Seawind 1260 was built with serious blue water cruisers in mind. 1260s rely heavily on composite materials throughout and the hull is infused with vinylester modified epoxy resin. This not only saves weight, but strengthens the boat, while also increasing performance and payload capacity.

The Australian indoor/outdoor, open lifestyle is entrenched in this new design, with an unbeatable living area complimented with brilliant natural ventilation, protected cockpit lounge,  and social helm seats putting the skipper in control as well as in the conversation. Best of all, you can enjoy what many cats compromise on …… â€œvisibility”‘ for the skipper AND crew. with 360 degree views from the helm and saloon seats all within the protection of the fiberglass coachouse and targa roof.

The 1260's innovative tri-fold doors easily retract into the hard top, allowing you to create a single  indoor/outdoor living area, with expansive seating, outdoor BBQ, sink and ice box. 

Twin helm positions are a must have for any true sailor, the Seawind 1260 offer the perfect balance between excellent 360 degree visibility and total protection from the weather in any conditions, whilst always offering the skipper full control and comfortable navigation around the cockpit.

Sail handling is a cinch with the large, fully battened, roachy main in a stack pack, and two fall block on the headboard for low sail raising effort. All sail controls are led through mast base turning blocks and fairleads back to the cockpit in an orderly manner. Tacking and gybing the 1260 is an incredibly simple one person activity, with a self-tacking jib.


Seawind 1260 Specs

Specs
Keel: Other
Hull Shape: Catamaran

Dimensions
LOA: 41 ft 0 in
Beam: 22 ft 3 in
Maximum Draft: 3 ft 8 in
Dry Weight: 18400 lbs

Engines
Drive Type: Sail drive

Engine Options
Engine Option 1: 2x Yanmar 29 HP
 
Tanks
Fresh Water Tanks: (185 Gallons)
Fuel Tanks: (126 Gallons)

Deck 

  • Aluminium Hatches & portholes (9 in total)
  • 4 x Forward Hatches 470mm x 470mm
  • 2 x Mid cabin hatches 470mm x 470mm
  • 1 x Port Bathroom window hatch 507mm x 377mm
  • 1 x Galley window hatch 507mm x 377mm
  • 2 x Aft Cabin window hatch (1 x Port, 1 x Starboard) 507mm x 377mm
  • Fibreglass Deck Hatches:
  • Forward anchor & storage hatches x 5
  • Cockpit storage hatches
  • Cockpit Icebox & hatch
  • 6 x Docking cleats. Each side: bow, stern & amidships.
  • 1 x Heavy duty mooring cleat on forward walkway.
  • Ventilation: 2 x forward cabin hatch vents.
  • Mast base turning blocks. All halyards & sail controls to cockpit.
  • 12 x Rope clutches.
  • Manual Sheet winches: 2 x 46ST – 2 speed self tailing& 2 x 40ST – 2 speed self tailing.
  • Stanchions/Rails: High quality stanchions, bow rails and stern rails with 3 life-lines.  700mm high to meet Australian survey requirements..
  • 2 x transom access gates with pelican hook releases.
  • 2 x side access gates with pelican hook releases.
  • Aft swim ladder: folding stainless aft swim ladder


Accommodations

  • Luxuryfinish interior.
  • Sides and cabin top lined with vinyl or moulded gelcoat.
  • Floors: Common area soles simulated timber.

Saloon

  • Timber dining table: Lowers to create coffee table or double bed.
  • Upholstered settee with day lounge
  • Cocktail cabinet/storage under day lounge
  • Timber chart table
  • Forward opening windows in 10mm toughened glass in marine anodised aluminium frame. Side windows in 6mm toughened glass.
  • Simulated timber flooring.
  • Saloon / cockpit doors: Moulded gelcoat tri-fold doors. Complete with folding mechanism for folding into Targa walkway.

Sleeping Cabins

  • Timber doors on all private cabins.
  • Port & Starboard fwd cabins : Each queen sized bed (2050mm x 1540mm)
  • Aft Starboard cabin : Double bed (1990mm x 1230mm)
  • Mattresses to be 150mm ( 6” ) quilted foam upholstered.
  • Cabins lined.
  • Recessed 12volt lighting.
  • Storage/Cupboards.
  • Simulated timber flooring.

Porthead

  • Timber lockable door.
  • Manual toilet. Discharge via holding tank.
  • Holding tanks built in. Discharge Pump out by shore station or directly overboard. Port 130L and Stb 110L.
  • Pipes, skin fittings and sea-cocks are easily accessible and to meet survey requirements.
  • Vanity basin with pressure hot & cold water.
  • Wall mounted shower head & mixer tap.
  • Electric shower bilge pump with direct overboard discharge.
  • Large quantity cupboards / shelves to very high quality.
  • Toilet roll holder, towel rack & mirror mounted.

Starboard

  • Timber lockable door.
  • Manual toilet. Discharge via holding tank.
  • Holding tank built in. Discharge Pump out by shore station or directly overboard.
  • Pipes, skin fittings and seacocks to be easily accessible and to meet survey requirements.
  • Vanity basin with pressure hot & cold water. Shower head and basin mixer tap with electric shower bilge pump.
  • Cupboard/shelves to very high quality.
  • Toilet roll holder, towel rack & mirror mounted.


Galley

  • Spacious galley with co-ordinated Polystone counter surfaces, timber accents.
  • Three (3) burner LPG stove. Stainless steel pot holders. Flame failure device to shut off LPG immediately in event of flame going out.
  • Double bowl stainless steel sink.
  • Pressure hot & cold fresh water system. Single lever mixing tap.
  • Refrigerator : Front opening upright fridge 130 litres.
  • Under bench storage with timber door fronts & cutlery drawers.
  • Inboard side of galley: Over-bench cupboard with sliding door fronts.
  • Simulated timber flooring.
  • LPG solenoid control in galley.


Engines

  • Twin Yanmar 29hp saildrive diesel engines. Fresh water cooling, rubber isolation mounts on reinforced fibreglass bed with integral oil drip pan.
  • Two bladed folding propellers.
  • Fuel tanks: Total 440 litres (98 gallons) in two survey approved pressure tested aluminium tanks. Fuel gauges fitted.
  • Water intakes for engines protected by external strainer. ( 1 per engine)
  • Twin primary Racor ( or similar) water separator / fuel filters, secondary engine fuel filters. Engine, fuel tank & fuel line installation to Australian standards.
  • Console mounted engine instruments with electric tachometers, engine monitoring & warning systems, engine hour meters.


Electrical

  • High quality DC electrical switch panel with circuit breakers, LED indicator lights and voltage display.
  • Marine grade tinned electrical wiring with extensive use of heat sealed connectors..
  • Batteries x 3 comprising: House System (400 amp hrs) : 2 x 200 amp hr AGM (Absorbed Glass Matt) deep cycle / heavy duty batteries. One engine cranking battery – 700 CCA AGM.
  • 230amp heavy duty isolation switch.
  • BEP Battery Monitor
  • 12 V lighting : Numerous 12V LED interior lamps and courtesy lights throughout including recessed lights in cockpit. Dome lights in cockpit. (All lights except fluros are LED)
  • 4 x 12V Outlets.
  • Survey approved LED navigation lights. Port & Starboard mounted on bow rails.
  • Deck floodlight mounted on spreaders.
  • Mast head anchor / riding light.
  • 2x 125w Solar Panels and 40amp regulator.


Mast, Boom, Sails

  • Clear anodised aluminium mast and boom. Single Spreader, 7/8 rig.
  • Standing Rigging – Forestay 3/8 (10mm) 1 x 19 Dieform wire.

–  Sidestays 3/8 (10mm) 1 x 19 Dieform wire

–  Diamonds 5/16 (8mm) 1 x 19 Dieform wire.

All fitted with turnbuckles and T-ball end fittings.

  • Halyards – Main halyard:  12 mm Spectra rope : Heavy duty shackle.

– Genoa halyard:  8 mm Spectra rope. Heavy duty shackle.

– Topping lift:  10 mm rope, Heavy duty shackle.

– Spinnaker Halyard:  12mm rope with snap-shackle spliced to end.

  • Boom outhaul.
  • 2 x mainsail single line reefing fitted.
  • All halyards, reefing lines to be lead back to cockpit through turning blocks, rope clutches.
  • Fully battened mainsail – Fibreglass sail battens.
  • Mast adjustable ball bearing batten car.
  • Cruising mainsail cover with integrated lazy jack system.
  • Self-tacking headsail. Curved headsail traveller track with end stops. Control sheet to cockpit.
  • Headsail furler.


Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. 

 

Home | Directories | My Profile | My Bookmarks | Login

Copyright ©2006-2018. All Rights Reserved.

Contact us