space
dot Return to list
dot Boat Insurance
dot Boat Transport
dot Boat Loans
dot Boat Surveys
dot Trade-in Values


Bookmark This Ad
 

2014 J Boats J/88 - 29'  Sale Pending


 
Year 2014
Length 29ft.
Price USD $134,900
Type: Pre-owned
Categories:
Sail
Hull Material Fiberglass/GRP
Engine type Single
Engine warranty 10 years
Fuel
Contact Information
 
Dimensions
Beam: 9 ft 6 in
Max Draft: 6 ft 6 in
Displacement: 2900 lbs
Dry Weight: 4990 lbs
Engines
Engine(s): Yanmar
Year: 2014
Engine(s) HP: 14 HP
Hull
Hull Shape: Monohull
Remaining Warranty: 10 years
Keel Type: Bulb

Additional Specs, Equipment and Information:

Boat Name
Crazy Eights
Specs
Warranty: 10 years
Keel: Bulb
Hull Shape: Monohull
Dimensions
LOA: 29 ft 0 in
Beam: 9 ft 6 in
LWL: 26 ft 10 in
Maximum Draft: 6 ft 6 in
Displacement: 2900 lbs
Ballast: 1400 lbs
Dry Weight: 4990 lbs
Engines
Total Power: 14 HP
Engine 1:
Engine Brand: Yanmar
Year Built: 2014
Engine Type: Inboard
Engine/Fuel Type: Diesel
Engine Power: 14 HP

Construction
  • J/88 hull & deck infusion molded with biaxial and unidirectional E-glass fabrics and balsa core in the hull for rugged durability and Corecell foam core in the deck for light weight. High density core material and additional glass reinforcements are placed in way of highly loaded hardware and components.
  • Molded internal bulkheads and liners finished with gelcoat, bonded and/or tabbed to the hull and/or deck.
  • White gelcoat hull with single Jet Black boot stripe.
  • 10 year transferable warranty against osmotic hull blistering, 5 year structural warranty.
  • Infused GRP molded structural grid with longitudinal and transverse keel support beams.
  • One large cockpit seat storage locker.
  • Open transom for easy access with lightweight ORC transom safety ladder.
  • High strength, inward turning and overlapping hull to deck joint bonded with structural adhesive.
  • White gelcoat deck with molded non-skid on horizontal deck surfaces.
  • Molded ISO/ORC height foredeck toe-rails on deck.
  • Large self-draining cockpit with molded secure helmsman foot braces in cockpit.
  • 6.5’ draft low VCG keel with lead ballast featuring molded GRP finish.

Single point lifting bar located under centerline bilge access board in main salon


Engine & Steering
  • 14hp, two cylinder Yanmar 2YM15 diesel engine with 80amp alternator and Saildrive SD-20 leg.
  • Keyless start/stop engine panel and tachometer with fuel gauge, alarms and engine hour counter.
  • Flexofold geared 2-bladed bronze folding prop.
  • Engine single throttle control with neutral safety switch.
  • Waterlock muffler with exhaust run aft to transom.
  • 15 gal fuel tank.
  • High aspect transom mounted rudder with custom SS gudgeon hardware.
  • Custom molded composite tiller in white gelcoat finish.
  • Spinlock EA 1200 adjustable tiller extension with handle.
  • Cockpit operated manual bilge pump operable from the helm position plumbed to transom fitting.

Accommodations
  • Molded main salon liner with full length settee berths, molded backrests, storage access bin in backrests and below cushions. Molded areas for sink (forward to port) and hinged utility counter (forward to starboard).
  • Sunbrella Charcoal Tweed w/Black Piping 3" standard main salon cushions.
  • Teak and holly synthetic high-wear cabin sole in main cabin with centerline access to bilge.
  • Igloo Cooler.
  • Fabricated companionway ladder with teak treads.
  • Molded V-berth and hull support liner. (Option for V-berth platform & cushions)
  • Head compartment with Raritan PH-II WC, mirror, TP holder, gravity style holding tank and deck pump out fitting.
  • Bin storage opposite head.
  • Molded cockpit support liner surrounding engine and mechanicals with foam insulated engine area.
  • Three engine access hatches
  • Low maintenance painted gelcoat finish on all interior hull & deck surfaces.
  • Black anodized aluminum compression post to transfer mast loads to internal hull structure.

Electrical
  • One AGM Group 27 battery (option for 2nd battery).
  • 12V DC On/Off battery switch.
  • 12V DC electrical distribution panel w/ 6 circuit breakers.
  • LED navigation lights.
  • UL approved stranded, tinned copper ABYC color-coded wiring.
  • Bonding system to meet ABYC regulations.
  • Two swiveling reading lights in main cabin.
  • Two red/white dome lights.
  • Two DC charging plugs.
  • Automatic electric bilge pump and panel switch for manual operation.

Deck Hardware
  • Low maintenance stainless grab rails on cabin house (P&S).
  • Companionway opening with PVC slider tracks, large gutter drains, molded seahood and sliding cover.
  • Acrylic offshore removable drop board with inside/outside lockable hasp.
  • SS custom fabricated chain plates for shrouds and headstay terminations.
  • Foredeck skylight hatch mounted on cabin house forward of mast.
  • Two fixed cabin side portlights.
  • Two aluminum 2-speed 40:1 self-tailing primary winches in cockpit.
  • Two aluminum 2-speed 30:1 self-tailing secondary winches on cabin top.
  • Two 10" Lewmar OneTouch lock-in winch handles.
  • Cockpit operated Harken adjustable jib car and 4:1 in-hauler systems to P&S.
  • 6:1 Mainsheet system leading to ratchet block and cam mounted on centerline swivel cam base aft of traveler.
  • 18:1 mainsheet fine-tune adjuster mounted to swivel base cam forward of traveler.
  • Adjustable mainsheet traveler with 4:1 control line and cam cleats P & S.
  • 24:1 Double ended backstay adjuster purchase system leading forward to P & S cam cleats.
  • Internal bowsprit launching system to exit aft face of the cabin house to cam cleat.
  • Harken underdeck headsail furling system with black anodized foil and control line on cabinside mounted cam cleat.
  • Spinnaker tack line side mounted rope clutch mounted to starboard on cabin side.
  • Spinnaker sheet blocks outboard of primary winches on stanchion bases and aft at stern rail.
  • Halyard lead blocks mounted at mast base, halyard organizers and double Antal Vcam rope clutches one per side.
  • SS stanchions, two SS stern rails at transom corners and custom SS bow rail with 9.5" lower lifeline height.
  • SS double lifelines.
  • Foredeck and transom mooring cleats.

Spars & Rigging
  • Hall Spars carbon fiber mast with double swept spreaders, long masthead crane and mainsail luff track. Deck step design and SS tabernacle system. Mast finished in satin black with contrasting white bands.
  • Boom with internal 8:1 outhaul, mainsheet attachment points, outhaul and single reef sheaves as well as provision for reef cleat and block at inboard end. Finished in satin black with contrasting white bands.
  • Carbon bow sprit with tack ferrule fitting, painted black finish. Bow sprit seal system mounted between sprit bearings.
  • 1 x 19 compacted strand wire headstay & side rigging with adjustable open-body turnbuckles, and DSK78 Ultra Wire backstay.
  • Complete Hall Spars running rigging package.

Sails

Sails by North Sails

MN-1 3DL Mainsail 12,600dpi 680 Aramid/Carbon w/3 full battens; 3 partial battens; 1 reef; black Sunbrella UV cover

AP-1 3DL Jib 12,600 dpi/680 Aramid/Carbon w/3 vertical battens, trim stripes, telltale window, black Sunbrella UV cover

J3 Jib 16,800dpi/TF 1 680 Aramid/Carbon w/3 vertical battens, trim stripes, telltale window

A2-1 SK75 96sq m Spinnaker; all white; box turtle bag

CZ-0 Polymax 90 65sq m Reacher; all white; box turtle bag

NOTE: Sails have been used less than 9 sailing days; spinnakers used only 5 sailing days.


Electronics

Tack Tick RaceMaster System 

Standard Horizon GX2200 VHF + cockpit mounted RAM mic.


Dealer Added Options Included
  • Two Tone Smoke White Deck.
  • Black Powder-coated stanchions & rails.
  • Bolstered Seats and Seat Backs finished in Charcoal Tweed w/Black Piping
  • Opening Ports in Cockpit Bulkhead
  • Backstay Flipper

Additional


Anchor & rode 
Lifeline cushions 
Fenders 
Docklines 
Winch handles 
MCS Cradle
Windex
Life jackets x 4
Extra Spinlock tiller extension
Fire extinguisher

NOTE: Boat has been sailed 9 times in July & August 2014. Dry stored, inside since September 2014.


Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Home | Directories | My Profile | My Bookmarks | Login

Copyright ©2006-2018. All Rights Reserved.

Contact us