dot Return to list
dot Boat Insurance
dot Boat Transport
dot Boat Loans
dot Boat Surveys
dot Trade-in Values

Bookmark This Ad

2011 J Boats J/111 - 36'

Year 2011
Length 36ft.
Price USD $269,000
Type: Pre-owned
Location Chester,
Hull Material Fiberglass/GRP
Engine type Single
Engine warranty 10 years
Contact Information
Beam: 10 ft 10 in
Max Draft: 7 ft 2 in
Dry Weight: 8900 lbs
Engine(s) HP: 20 HP
Hull Shape: Monohull
Remaining Warranty: 10 years
Keel Type: Fin

Additional Specs, Equipment and Information:

Boat Name
Warranty: 10 years
Keel: Fin
Hull Shape: Monohull
Beam: 10 ft 10 in
LWL: 32 ft 9 in
Maximum Draft: 7 ft 2 in
Dry Weight: 8900 lbs
Total Power: 20 HP
Engine 1:
Engine Type: Inboard
Engine/Fuel Type: Diesel
Engine Power: 20 HP

Hull & Deck
  • Balsa core/biaxial E-glass vacuum infused hull laminate. Corecell/biaxial E-glass deck laminate. All laminates engineered and built to current ISO and ABS structural standards.
  • White gel coat hull with double black bootstripe.
  • Molded companionway slide-in seafood; companionway instrument pod.
  • ORC size molded foredeck toe-rails.
  • GRP molded main structural bulkhead, bonded fore & aft on hull and deck with single opening to forepeak.
  • Fore/aft and transverse keel support beams.
  • Composite mast bearing beam with integral aluminum tapping plate to secure mast step.
  • High aspect two-metal racing keel with lead bulb and stainless fin, flange mounted to a hull recess.

Mechanical & Steering
  • Yanmar 3YM20 3 cylinder 4-stroke 21hp diesel engine with 60 amp alternator and SD 20 saildrive with 2-piece split zinc.
  • 85.2 Hrs at May 21, 2015
  • Yanmar engine instrument panel mounted in recess on cockpit wall near wheel
  • 16x 11 diameter geared Flex-O-Fold folding prop.
  • Engine throttle control with neutral safety switch.
  • Balanced spade rudder constructed using “E-glass” with custom carbon rudder shaft mounted in Jefa self aligning rudder bearing system.
  • Composite 60” 3 spoke wheel with Sunbrella cover recessed in molded cockpit wheel well.
  • Edson steering system including Articu-lock sheaves, 6.5” radial drive, needle bearing with integral wheel brake, and chain/wire cables.
  • Jefa emergency tiller.

Deck Hardware
  • 46:1 Harken STP Performa self-tailing primary winches.
  • 40:1 Harken Quattro self-tailing cabin top winches.
  • (2) 10” Lewmar One-touch winch handles.
  • Two winch handle holders.
  • Two-speed Harken Mainsheet System with 6:1 rough tune purchase to swivel cam base & 24:1 fine tune purchase led to centerline ratchet cam.
  • 4:1 Harken Traveler System – led P&S.
  • 6:1 Harken Adjustable Jib Lead System.
  • Jib in-hauler hardware & 4:1 tackle P&S.
  • 6:1 Cunningham system.
  • Harken 57mm Airblocks for spinnaker sheet and tack line.
  • Harken bow-sprit control system led internally to cockpit mounted cam cleat.
  • Mast base halyard blocks and 4-sheave organizers P&S.
  • Antal halyard & tack line rope clutches.
  • Custom SS mast collar with pins for halyard blocks and halyard bale.
  • Stainless cabin top handrails P&S.
  • Tapered black powder coated lifeline stanchions.
  • Double lifelines to meet ORC offshore regulations with 9” lower lifeline height.
  • Custom black powder coated bow pulpit and dual corner stern rails with LED navigation lights.
  • Four 8” 4-bolt SS mooring cleats.
  • Four SS padeyes for cockpit spinnaker blocks.
  • Interior ventilation from two framed opening ports in sides of cabin trunk and offshore style forward skylight deck hatch above V-berth (option for two opening ports on aft cabin face).
  • Acrylic offshore drop-board with key lock and inside operable latch/unlatch.
  • Cockpit operated manual bilge pump.
  • Two 12"x 20" polypropylene mesh line bags.
  • Custom SS stemhead, shroud and backstay chainplates.

Plumbing & Electrical
  • 18-gallon fuel tank with baffles and inspection/clean out port.
  • 12-gallon head holding tank.
  • Raritan PH-II head with Y valve and deck pump-out access.
  • 26-gallon water tank.
  • Manual fresh water foot pumps in head and galley.
  • 90 amp deep-cycle, sealed AGM battery.
  • Three position battery switch.
  • Electrical panel w/circuit breakers.
  • Aquasignal LED Navigation lights to meet COLREGS.
  • Bonding system.
  • Six reading lights.
  • One adjustable nav light.
  • Two red/white LED dome lights
  • One fluorescent light in head.
  • Automatic bilge pump & panel switch for manual/auto operation.


Spars & Rigging
  • Hall Spars 152c autoclaved carbon fiber mast with double set of tapered aluminum spreaders, backstay crane, flush shroud terminations, sheaves for main, 2 jib & 2 spinnaker halyards, vang and boom gooseneck fittings, steaming light, internal wiring conduit, pre-formed mast wedge kit. Mast/boom finished in black with contrasting white measurement bands. 
  • Alloy 6061-T6 Boom with 12:1 internal outhaul, two mainsheet block bales, vang lug, three sheaves for reef lines and outhaul.
  • Nitronic 50 discontinuous rod standing rigging package including shrouds and forestay.
  • Ronstan calibrated shroud turnbuckles.
  • Dyneema DSK-78 Backstay.
  • Remote Navtec hydraulic backstay system mounted within reach of helmsman on front face of wheel pedestal.
  • Low-profile Facnor “Flat” headsail furling system with control line aft to port side of cabin trunk.
  • Carbon fiber, retractable bow sprit with internal bearing system and black painted finish.
  • Running rigging package w/Crystalyne Vectran Main & Jib Halyards with Tylaska shackles, Endura Braid Dyneema core jib & main sheets. DSK 75 tapered spin halyard, Maxibraid tapered spin sheets with T-8 shackle. Also includes reef line, cunningham, pole control, tack line, inhauler lines, traveler control lines, mainsheet strop and mainsheet fine tune.
  • Hall Quikvang with integral cleating.

  • Off-white low-maintenance bulkheads.
  • Molded engine box cover with 1” sound insulation.
  • Powder-coated aluminum companionway ladder w/teak treads.
  • Twin 6’9” quarter berths aft of the galley/nav area with storage below.
  • Main bulkhead privacy door.
  • Teak and holly style synthetic high-wear cabin flooring.
  • SS overhead handrails in main salon P&S.
  • Two Large acrylic fixed portlights.
  • 6’4” settee berths with backrests - finished in bolstered black Ultra Leather.
  • Shelf outboard of settee berths with storage behind backrest cushions.
  • Nav Station/Office with full leg room, hinged-lid access to chart storage, outboard instrument panel and storage bin.
  • L-Galley with sink, faucet, fresh water foot pump, sink drain seacock, ice box with top opening, Origo two-burner alcohol stove and storage cabinet outboard.
  • Head compartment with sink and outboard storage to port and large sail/tool storage bin to starboard.


Additional Included Features


  • Two tone deck.
  • Additional 90 amp battery.
  • Opening ports on aft face of cabin house (2).
  • Black Composite three spoke wheel with cover.
  • Thurston dodger with side curtains.
  • 110 VAC Shore Power system with 30’ cord, 2 outlets, 20 amp battery charger, equipment leakage circuit interrupter (ELCI), and galvanic isolator.
  • DC Refrigeration 
  • Black Powder Coated stanchions and bow/stern rails.
  • Quattro Secondary Winches in lieu of standard.
  • Removable V-Berth with platform, cushions and two reading lights.
  • Fiberglass molded cockpit locker storage liners (2) installed in locker openings.
  • Instrument Pod

Comfort Group Package:

  • Cockpit seat and helmsman cushions (4 piece set); Sunbrella covered lifeline covers (4 piece set); mainsail cover in Sunbrella with J/111 Logo.

Hall Spars Package:

  • 2nd Jib Halyard
  • 2nd Spinnaker Halyard 

Waterline Systems Options:

Level 1 Bottom Finish w/VC 17

Espar D4 Furnace w/1 outlet


Nexus(Garmin) NXR Sailing Instruments including pod mounted Multi Control plus two XL20 displays and three XL20 mast mounted displays (6 displays total allowing for 12 lines of information) with PC interface

Stereo w/ cockpit control & four speakers

Standard Horizon 10" Color Chartplotter

VHF at Nav Station plus RAM Mic in cockpit


North Sails

Mainsail - 3DL Carbon Aramid MN-H heavy air Main w/ Taffeta one side, 1 reef, 16800 3DL M.

Mainsail cover w/J/111 logo (black)

#1 Jib - 105% MH-1 Medium Heavy Jib 3DL Carbon Aramid 16800 3DL M

#3 Jib - 100% H-1 Heavy Jib 3DL Carbon Aramid w/Taffeta one side 19200 3DL M

#4 Jib - 90% Heavy Jib 3DL Aramid 19200 3DL M

UV Zipper Sock Jib Cover (black)

Spinnaker - Code 5A 110sm AIRX 900/700 (all white)

Spinnaker - Code 2A class max 130sm AIRX 600 (all red)


The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
External Links
Manufacturer Website
Home | Directories | My Profile | My Bookmarks | Login

Copyright ©2006-2018. All Rights Reserved.

Contact us