dot Return to list
dot Boat Insurance
dot Boat Transport
dot Boat Loans
dot Boat Surveys
dot Trade-in Values

Bookmark This Ad

2006 C&C 115 - 38'

Year 2006
Length 38ft.
Price USD $170,000
Type: Pre-owned
Location Cleveland / Rocky River, OH, United States
Hull Material Fiberglass/GRP
Engine type Single
Contact Information
Builder: Novis Marine
Designer: Tim Jackett
Beam: 11 ft 11 in
Length on Deck: 36 ft 0 in
Cabin Headroom: 6 ft 4 in
Max Bridge Clearance: 59 ft 9 in
Max Draft: 6 ft 8 in
Draft Drive Up: Sail drive
Displacement: 11800 lbs Half Load
Dry Weight: 11800 lbs
Engine(s): Yanmar
Engine(s) HP: 28 HP
Cruising Speed: 7 mph @ 3200 RPM
Fuel: Aluminum (26 Gallons)
Water: Aluminum (70 Gallons)
Holding Tank: Plastic (15 Gallons)
Hull Shape: Monohull
Keel Type: Bulb

Additional Specs, Equipment and Information:

Boat Name
Builder: Novis Marine
Designer: Tim Jackett
Keel: Bulb
Hull Shape: Monohull
LOA: 37 ft 9 in
Beam: 11 ft 11 in
LWL: 33 ft 0 in
Length on Deck: 36 ft 0 in
Minimum Draft: 6 ft 8 in
Maximum Draft: 6 ft 8 in
Displacement: 11800 lbs Half Load
Ballast: 4200 lbs
Bridge Clearance: 59 ft 9 in
Headroom: 6 ft 4 in
Freeboard: 4 ft 8 in
Dry Weight: 11800 lbs
Total Power: 28 HP
Engine 1:
Engine Brand: Yanmar
Engine Type: Inboard
Engine/Fuel Type: Diesel
Propeller: Folding propeller
Drive Type: Sail drive
Engine Power: 28 HP
Cruising Speed: 7 mph @ 3200 RPM
Maximum Speed: 8 mph
Fresh Water Tanks: Aluminum (70 Gallons)
Fuel Tanks: Aluminum (26 Gallons)
Holding Tanks: Plastic (15 Gallons)
Number of single berths: 2
Number of double berths: 2
Number of cabins: 2
Number of heads: 1
Cockpit speakers
Navigation center
CD player
Wind speed and direction
Asymmetric spinnaker
Storm jib
Battened mainsail
Steering wheel
Spinnaker pole - Carbon Fiber
Inside Equipment
Manual bilge pump
Electric bilge pump
Hot water
Battery charger
Marine head
Electrical Equipment
Shore power inlet
Outside Equipment/Extras
Swimming ladder

Sail Area

IJPE : 781.00 sq ft
I : 52.17 ft
J : 14.50 ft
P : 49.33 ft
E : 16.33 ft
Working Sail Area : 781.00 sq ft

Manufacturer Provided Description
With her epoxy resin, eglass, and CoreCell core post-cured hull laminate, vinylester resin infusion deck, and a carbon-fiber mast as standard equipment, the 115 maintains highoctane performance ratios yet an interior that features two separate cabins, luxurious main cabin, sit-down nav station, large galley, and head with stall shower. The C&C 115's long waterline (33 feet) produces a very impressive 147 displacement/length ratio. Her epoxy hull laminate consists of an all uni-directional e-glass structural laminate locally reinforced with uni-directional carbon fiber and sandwiched on CoreCell linear urethane foam coring. The laminate is carefully impregnated in metered equipment, consolidated along with all reinforcements and the coring, and placed under vacuum to allow ambient temperature cure. After this,the laminate is post-cured in a computer-controlled oven to maximize the physical properties of the composite. Building the laminate this way produces the lightest, strongest, and stiffest structure possible and the weight saved can be used for interior appointments and additional ballast further enhancing the 115's performance and livability. The bulbed 4,200-lb lead keel has an extremely low center of gravity producing a high righting moment allowing a powerful sailplan resulting in a sail area/displacement ratio of 23.1.

Additional Description

The 115 interior belies her raceboat capabilities. Using lightweight composite laminates, cabinetry is abundant and attractively finished in varnished cherry with laminated, curved trim. Bulkheads are attached to the interior components using Plexus methylmethacrylate adhesives providing additional stiffness to the hull structure without adding weight. Accommodations for six are provided in fore and aft double cabins and bunk-length main cabin settees. The forward facing nav station is designed to accommodate full navigational instrumentation. The galley is fit with a two burner gimbaled LPG stove/oven, large icebox, deep sink, and ample storage for provisions. A stall shower and large head are located aft and to port. By concentrating on weightsaving construction technologies the 115 delivers an interior befitting a comfy cruiser without giving up her dedication to top racecourse performance.

Additional Description
The infusion deck's laminate is structured from unidirectional e-glass, Baltek AL 600 coring, and a custom-blended vinylester resin. Using resin infusion with these materials results in a lighter, stiffer, and stronger deck than those produced with the antiquated, low-tech polyester resin laminating techniques favored by most other builders. C&C's distinctive deck design is continued on the 115. Wide side decks with molded-in non-skid provide safe and secure maneuvering in a seaway. The signature ?slash? style portlights and classic C&C styling makes the 115 a head-turner in any harbor. The cockpit puts comfort and function first. The helmsman is pampered with a wrap-around helmseat with the 60" wheelwithin fingertip reach for upwind sailing. The main trimmer is given a convenient position just forward of the helmsman and has the mechanical advantage necessary in the Harken gross/fine tune mainsheet system to tweak the best performance possible. The cockpit seats are over 6 feet long and have high seat backs for comfort. C&C's custom toerail and stanchion design maximizes on deck space and offers a necessary toehold when moving forward in challenging conditions. With the racer/cruiser in mind the deck for the 115 is designed for maximum performance while offering comfort for after the race or when cruising.

Mast / Rig

The mast on the 115 has been co-engineered by C&C Yachts and SP, the world leader in composite engineering and materials technology, to produce an optimal section for the boat. Built by Novis Composites utilizing pre-preg, carbon-fiber laminates, cured under pressure (100 psi) at 250 degrees F, the 115's mast is less than half the weight of a comparable aluminum mast yet is stiffer and stronger. The weight saved aloft adds to the 115's stability advantage and reduces pitching moment maximizing her performance. A carbon-fiber mast, once an expensive option or custom raceboat feature, is standard equipment on the C&C 115, further testament to C&C's dedication to advanced yacht construction.

The boat's fractional rig features a 110% One-Design genoa, sheeted to Harken adjustable housetop tracks set at 8.5 degrees for tight upwind sheeting angles. Offwind performance is optimized with a One-Design 15' 11" spinnaker pole allowing for an oversized symmetrical spinnaker. For daysailing or cruising, there are plenty of options for sailing with an asymmetrical spinnaker whether in a snuffer or not.

Additional Information

Additional options:

  • Ultra Leather "Sand" interior fabric
  • 5 Cabin fans
  • Autopilot prewire
  • 12 volt outlets
  • Courtesy lighting
  • Y-valve & Mac-pump
  • Rod rigging
  • spinnaker gear w/ Carbon fiber spinnaker pole
  • clear coat carbon fiber mast
  • Harken upgraded winch package
  • Professionally applied racing bottom, w/ barrier coat treatment
  • Safety equipment list upon request
  • Anchor and rode package included



(2) Main sails: 2011 Sobstad, 2006 Doyle.

(5) head sails: light #1, #2, Heavy #1, and new North H, and a #4.

(4) Spinnakers: .50 runner, .75 reacher and Runner, and A-sail

Storm sails: try-sail and jib.





The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Home | Directories | My Profile | My Bookmarks | Login

Copyright ©2006-2018. All Rights Reserved.

Contact us